Rohde & Schwarz Vector Network Analyzer ZV-Z229 40GHz 2.92mm Calibration Kit
SPECIFITIONS
Rohde & Schwarz ZV-Z229 is a calibration piece specifically designed for vector network analyzers (VNA) to achieve high-precision S-parameter measurement calibration. This calibration piece is usually part of a mechanical calibration kit (such as the ZV-Z21x series) and supports the SOLT (short circuit - open circuit - load - bypass) calibration method, suitable for testing requirements in the radio frequency and microwave frequency bands.
- Frequency range of DC to 40GHz
- 50 Ohm 2.92mm male and female components
- Specified directivity of at least 38dB from 700MHz to 24GHz
- Source match of at least 36dB from 700MHz to 24GHz
- Load match of at least 38dB from 700MHz to 24GHz
Main features
Frequency range: Covers typical RF and microwave frequency bands (exact range needs to refer to the model specifications, usually from DC to high frequencies such as 26.5GHz or higher). Interface type: Uses standard connectors (such as 3.5mm, N-type or SMA), ensuring compatibility with the test port.
Calibration standards:
Provide short-circuit (Short), open-circuit (Open), load (Load), and through (Through) standard components for full-duplex port calibration. Materials and processes: Precision processing of metal components and ceramic loads to ensure the repeatability and stability of the calibration.
Calibration procedure usage method steps 1. Connect the calibration components: Connect the short-circuit, open-circuit, load and straight-through standard components of ZV-Z229 to the test ports of the VNA in sequence. 2. Select calibration mode: In the VNA interface, select the SOLT calibration program and connect each standard component in the prescribed sequence as prompted. 3. Perform calibration: After completing all the measurements of the standard components, the VNA will automatically calculate the error model and apply the calibration data.
Notes for Attention
Make sure the connectors are clean and undamaged to avoid introducing additional errors. . After calibration, verify the insertion loss and return loss of the through-piece, and confirm the effectiveness of the calibration. . Regularly check the physical condition of the calibration pieces to prevent performance degradation due to wear and tear.
Compatibility and alternative models
The ZV-Z229 is usually compatible with the Rohde & Schwarz ZVAZVB/ZVT series of network analyzers. . Calibration accessories with similar functions include Keysight 85052B or Anritsu 3650 series, but it is necessary to pay attention to the matching of interface type and frequency range.
SIMILAR PRODUCTS
ZN-Z129 ZN-Z129E ZN-Z135 ZN-Z170 ZCAN ZV-Z129 ZVZ135 ZV-Z170 ZCAN ZN-Z235 ZN-Z229 ZV-Z270 ZV-Z235 ZV-Z235E ZV-Z229 ZV-Z224 ZV-Z218 ZV-Z210 ZV-Z270 ZCAN ZV-Z235
Our brands of Wisdomlong Technology CO.,LTD
Payment:
We only accept payoneer payment from verified accounts with confirmed address.
Delivery details:
All item(s) use DHL/TNT/FEDEX global expedited shipping service,takes 4-5 days arrived.
Item(s) shipped within 2-7 working days after receiving cleared the payment;
Please leave a telephone number for on-time delivery;
We can offer worldwide ship if you are in exclude locations, please contact us the shipping details.
Please Note:
Import duties,taxes,VAT,and charges are not included in the item value or shipping fee.Buyers are responsible for these charges.
Terms of sales:
We accept 30 days return for replacement or money back.
If you are not satisfied when you received the item(s),you can choose return within 30 days for a replacement or money back. But you need to pay the return shipping
fee and keep the item in good condition as we sent.Please contact us before you return it
About us:
All products sold in the store are original an quthentic,and all products are guaranteed for 3 month warranty.
Due to a wide variety of models,we have not been able to upload all of them.If the items you need can't find it in our store,please fee free to contact us.
If you are satisfied with our products and service,pls kindly leave your positive feedback.We also will give you a 5 starts remark.
Contact us:
Pls feel free to contact us.You can click "contact seller" on the page,send massage to us.
Your request will be replied within 12 hours.
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
¡Su mensaje debe tener entre 20 y 3.000 caracteres!